Daily Care Of Your Coffee Machine

Daily care of the coffee machine mainly includes the following aspects:

Cleaning the brewing head and portafilter: After each coffee extraction, remove the coffee portafilter, remove the coffee grounds, then turn on the cleaning switch, use the pressure of the coffee machine to spray hot water, and clean the brewing head and portafilter.

Cleaning the steam wand: After using steam to make milk foam, wipe the steam nozzle with a wet cloth to ensure it is clean. Then open the steam valve for 2 seconds, use steam to clean the remaining milk dirt, and keep the jet hole unobstructed.

Cleaning the water tray and drain tank: Remove the water tray, rinse with hot water, and then soak for 5 minutes. Scrub and wipe dry, then put it back for use, and check whether there is any foreign matter blocking the drain tank.

Cleaning the exterior: Gently wipe the exterior of the coffee machine with a wet towel, and be careful not to let water penetrate into the machine to avoid damaging the circuit system.

Cleaning the milk frother and milk tube: Remove the milk frother and milk tube every two or three days, and clean them thoroughly with running water to prevent blockage caused by the accumulation of coffee grounds and milk stains.

Clean the bottom coffee stains: Regularly scrub the bottom of the coffee machine to prevent coffee stains from accumulating, affecting the appearance and corrosion of metal parts.

Check the water tank and water level: Check the water level of the water tank before turning on the machine to ensure that there is enough water. It is best to use filtered or softened water to avoid scale accumulation that affects the taste of coffee and the life of the coffee machine.

Descaling: After long-term use, scale may form inside the coffee machine. Use a special descaling agent and follow the steps in the manual to perform descaling operations to ensure that the inside of the coffee machine is clean.

Check parts: Carefully check parts such as steam pipes, water pipes, and rubber rings to see if there are signs of aging, cracks, or water leakage. If problems are found, replace or repair them in time.

Grinding machine maintenance: If the coffee machine is equipped with a grinder, regularly check the wear of the grinder's blade. If the wear is severe, replace it in time to ensure that the ground coffee powder is uniform in coarseness and fineness.

Through the above steps, you can ensure that the coffee machine is always in the best condition and provide delicious coffee.